Posts Tagged ‘green’


Solar PV – Construct Your Own Personal Energy For The Destiny Of The Environment

Monday, June 14th, 2010

Solar PV are a group of cells that contain within it materials that may change photo voltaic radiation directly into direct current electricity. More particularly it can be the technology that will transform sun rays directly into electrical power. The sun’s rays can give around a thousand volts involving electricity each block meter from the earth’s work surface on a sunny moment. If most of that electricity could be makes use of we could energy our property for free.

The use of solar power is definitely wide. You can use it to create electrical power in your home, to power the electric automobiles, and street lighting for you to name just a few. Photovoltaic have been utilized as far back as 1958, nevertheless; their practical application is typically with space. These are most generally made use of at present throughout solar energy system hand calculators in which require simply daylight to work.

PV cells possess materials known as semiconductors which can be silicon along with are most frequently used. When daylight sinks into this cell part of which will daylight is engrossed in the semiconductor material. Electrical power for the reason that light is actually transferred to the particular semiconductor which will loosens electrons which then amount widely within the specified direction. This kind of flow of electrons is a current which you can use as electric power as soon as metal associates are placed at the top and bottom of the Pv cell. This current and the cell’s current tell us the amount of wattage the particular solar cells can generate.

Using solar energy is not however common enough to locate everyone using it but there are a few people that feel they are able to support environmental surroundings with the use of sun Photovoltaic. With the price of electricity increasing and the economy spiraling downwards, people are curious about saving on their utility bills or totally getting rid of them with the use of solar energy. Photovoltaic is an alternative electric power generating resource that can save money and also do its part in saving earth. There is much consider global warming as well as the greenhouse effect along with using solar PV, as an alternative electric power source, can make us feel good about ourselves as we do our part.

Now we’ve observed in the last years issues like the prices of the petrol crud oil barrel which have been achieving new peaks, the catastrophic effects of climatic change due to the emission of co2 causing serious warmth along with frosty waves along with various other impressive catastrophes, and more recently the dreadful leak in the Mexico bay doing damage to the life of so many people along with harming all the faun in the region, the time is right to take action and stop depending on traditional energy. Considering alternative ways can be a possibility. By way of example if perhaps something like 20 per cent of the Sahara desert was initially covered with solar PV then it may supply 100% of the entire world electric usage. Power from the sun is really a resource that will not finish anytime soon, long term and 100 % free to utilize by any one. Generally there is a interest to make a world wide transition of attitude and find conscious that it could help you save your kids planet.


Make Your Clothes Dryer Save You Money

Friday, April 2nd, 2010

I would like to share a few tips about how to save a few bucks with your clothes dryer and at the same time conserve energy.

Lets look at how a clothes dryer works. It sucks in surrounding air and heats it up. It blows the heated air through a spinning drum, which your clothes are in, and forces air through a pipe to be vented. The process is really simple and there are factors that you cannot control but there is a lot which you can.

The air that your dryer is sucking in should be as dry as possible and while you have no control over the humidity don’t use your dryer when the humidity spikes. Usually during or directly after a rainfall. Often times the washer dryer combination’s are in a small area. If you’re using the washer at the same time then it raises the humidity of your laundry. Try to keep it ventilated so that the damp air can escape from you clothes.

Next you’re going to want to look at the clothes that you’re drying. If just pull them out of the washer and throw them into the dryer you’re making the dryer work a lot harder. The final rinse cycle tends to crumple your clothes into little balls. If you give each item a shake before you put it in the dryer it improves the airflow throughout the garment allowing it to dry faster. Another trick is to throw a clean dry towel in with each load. This will pull the moisture out of the clothing and since the towel is already dry whatever moisture it picks up will evaporate quickly.

Clean your lint trap after every load. This will allow the damp air to escape improving overall efficiency. Dryer lint is blamed for thousands of home fires yearly. If lint comes into contact with the heating element it can easily ignite. Also make sure that your screen doesn’t become clogged. Screens can be easily cleaned with toothbrush and warm water.

Finally check your dryer hose that attaches to the outside vent. The first thing is to make sure that it is firmly attached to your dryer and the outside vent so your not blowing damp air into back into your laundry area. Another major mistake that is often made it the hose itself is way to long. You can tell if you look behind your dryer and the vent hose is snaking around back there. When you purchase the hoses they usually come in lengths about six feet long but the connection from the dryer to the vent is often less than a foot. You should cut the hose to make the connection as direct as possible but make sure that you leave a little extra so it won’t come off if your dryer shifts a little. This will optimize the airflow out of your dryer and also eliminate a good place for lint to build up.

Grab pragmatic recommendations about the topic of Affiliate marketing Tutorials – make sure to study the page. The times have come when concise information is really within one click, use this possibility.


Save Resources And Energy By Recycling Aluminum And Steel Cans

Wednesday, February 10th, 2010

Each and every year thousands upon thousands of tons of trash is thrown into landfills. While we are in no immediate danger of running short on landfill space, this is expensive in terms of space, time, and energy invested, as well as the sheer waste of materials that will not ever be used again. So, consider the reasons below for keeping your steel and aluminum cans out of landfill sites by recycling them instead.

- Aluminum that has been recycled is back in use again within 2 months. On the other hand, it would take over 200 years for that metal to break down naturally in a landfill.

- Recycling is not just about material savings, but also about energy consciousness. Each aluminum can recycled saves enough energy to run a television for 3 hours; one pound of cans recycled will save enough energy to run it for four days!

- Metal cans can be exchanged for cash at many places. Several states offer five cents for each can given to them, and some recycling centers offer between fifty cents and two dollars for every pound of cans recycled.

- Recycled aluminum and steel are have exactly the same composition as ‘new’ aluminum and steel. Recycled metals are simply melted down and then forged into new products.

- Every day, Americans recycle around 100,000 aluminum cans per minute. The majority of that number is a result of certain communities working hard on special projects that they set-up, and that is something that you should encourage those in your neighborhood to take up, as recycling can bring communities together.

- The 100,000,000 ‘new’ steel cans produced every day contain 25% recycled materials. That is the equivalent of 25 million reclaimed cans vs. 75 million completely new cans. If more people recycled, that number would soon become 50-50 and a huge amount of energy and resources would be saved.

- The United States currently uses steel which is more than 65% recycled. That is not too bad, but there is definitely room for improvement. This proportion would go up significantly if more people knew that they can recycle their steel cans.

- There are can crushing machines available that can be used to make the job easier, including some that can be made at home for almost no cost. Therefore, it is no excuse to say that recycling cans takes up too much space within your home.

http://www.cancrusher.org.uk is a site offering information about recycling aluminum and steel cans.


Ethanol Biomass – The Thing You Need To Understand At This Day And Age

Friday, February 5th, 2010

Ethanol biomass can be defined such as biological elements or vegetation that is used to create gas or sustaining energy. More particularly this is a biological origin that has been extracted from the living material. Ethanol has made its alternative energy coming from plant life for instance corn, switchgrasses, hemp, willow and sugar cane as well as other plants that produces or hold all kinds of sugar. A large number of plant life either includes sugar or contains certain portion within it that can be converted to sugar. This valuable sugar is required to produce ethanol which is carried out by fermentation, distillation together with dehydration. Fossil fuels don’t fall into this classification. They are not polar solvents as is ethanol, instead they’re hydrocarbons.

Breaking down cellulose from specific plants such as corn is really a complex procedure. Cellulose is made up of a component of strands that contain sugar along with these sugar have to be extracted so that they can make the carbs needed to make ethanol. The procedure used is a combination of heat with pressure and a number of basic acidic ailments. A chemical is employed in order to break down one of many chains of glucose and links on the free end of the sequence and performs its way through the sequence breaking down pieces of sugar (glucose). The last step is to break up the chain straight into two molecules and ferment this into ethanol. That is a very costly path to get to ethanol. Scientists have proposed a way of biologically engineering a bacterium that would digest the substance necessary to generate ethanol biomass.

Ethanol biomass is really a controversial issue specially in the act of biologically engineered microorganisms as well as the fright than it escaping to the atmosphere. On the other hand, there was substantial controversy around the usage of ethanol within the usa. Controversy is just not always a deterrent to moving forward if it is industrially or scientifically. We look at controversy as simply views and we might need views to improve all of our views, modify our process of doing anything and most of all as a means to move onward, to improve. After all bio-ethanol is essential for the future of our planet.


Positive Steps In Making Cruises Kinder To The Environment

Friday, January 22nd, 2010

Cruising companies have recently felt the persuasive powers of various governments, who have asked them to clean up their act and develop ships that are more sustainable and environmentally viable. The extent to which cruise ships damage the environment really entered the public’s consciousness a few years ago with a number of critical expert reports released to the media, and this is something cruise companies wish to put behind them. Couple this with the increased taxes that vessels are now receiving based on carbon emissions, and there is real motivations to innovate. Lets take a look at 3 of the most promising eco developments.

More Efficient Ships. Not only are ships now being made from more sustainable materials and but they are also being designed and constructed to more efficient specifications. The materials are getting lighter so less energy is needed for propulsion, soft sails are often being included, and a company in Ireland have pioneered a biogas-powered engine, set to soon be used by Cunard Cruises. The very same Irish company are also working on hydrodynamic hulls that actually convert wave energy into forward momentum.

Hybrid Engines. A number of cars and trucks have been developed with hybrid fuel-battery engines now and have integrated very well with the more traditional vehicles. Now ship builders such as those making boats for Silversea Cruises are getting in on the action and making boats that couple the traditional diesel power with electrical power. When a ship comes into harbor it is connected to the shoreside power source and gets a quick charge up of its huge batteries

Sharing Cargo. A great idea being trialled by Oceania Cruises is ‘cargo sharing’. If a cruise ship has not filled all its spaces, it can offer to carry commercial cargo for other companies sending things to the same place, for a small commission of course. The cruise company wins as they get money they would otherwise not have got, the cargo company does not have to charter its own boat, and energy is saved that reduces carbon emissions.


Sustaintable Materials Of The Future

Friday, November 20th, 2009

OK, so the Bamboo PC it was a gimmick. A laptop version of the bamboo PC was released at the Hanover computer fair last March. The laptop features a laminated bamboo casing which surrounds a rather basic computer, that alone won’t make much of a dent in the amount of plastics around the world.

Despite not having any major eco benefits to the bamboo computers, they did give a good demonstration of what can be done with a material that versatile.

Bamboo must be the only raw material that can be used as food, clothing and building materials. Even Edison used bamboo in one of his early lightbulb designs. Its strength and low price tag makes it a great material for building, particularly in parts of Asia where it’s used as scaffolding. The bamboo fibres have extremely high tension and compression strength. Bamboo has almost the same tensile strength to weight ratio as steel, plus it has roughly twice as muhc compressive strength as concrete. Now there’s even a bamboo laptop!

Bamboo products ticks almost all boxes for anyone looking to purchase eco-friendly home furnishings. To begin with, it’s an extremely sustatinable material. There are some species of bamboo that grow more than a metra each day. Local people can cut down as much as they need for carving, weaving, sawing or splitting and still have as big a forest at the end of the year as they had at the start. As for the global warming question, because the bamboo is a plant, anything that’s been made from it contains a large proportion of atmospheric carbon. Whereas any equivalent product made from plastic actually increases the carbon level in the atmosphere!

Another point; because it’s natural, bamboo has variations in quality and appearance that make it difficult to use in most mass production processes. What this means is that you can be almost positive that a skilled craftsman has built the bamboo product you buy. If you buy from a reputable source of eco-friendly products, you’ll know that the craftsman that made the item was paid a fair wage for their time and skills. Finally you’ll be sure that the product you buy hasn’t accumulated air miles in its journey from craftsman to your home.

With eco credentials as strong as these, it’s amazing how beautiful bamboo products are. Picture a skilfully made bamboo box, lovingly lacquered with 15 layers of natural shellac. All natural, and really lovely. I recently picked up a beautifully crafted bamboo knife block and I’m seriously considering purchasing other bamboo bamboo knife block such as salad bowls. Stylish and ethical. Win. :)


The Future Of Solar Is Bright!

Wednesday, November 18th, 2009

The Future of Solar PV (Photovoltaic) Energy
1. The Problem
2. The Solution
3. The Results
4. The Benefits
5. An Investment in the Future

1. The Problem:

Traditional sources of electrical power generation are running out as production will peak in the next decade but demand will continue to rise. Energy prices will continue to rise at a higher rate as well as the number of outages during peak hours. There is the obvious problem of the pollution we are causing to our environment.

From my perspective, the world’s energy needs vary greatly; there is no clear single solution to the problem of supplying the world’s energy.

All forms of energy production have issues associated with them, i. e. -

1. Coal – Pollution/Strip Mining
2. Natural Gas – Cost and Lack of Infrastructure
3. Hydro – Limited Availability/Environmental Concerns
4. Wind – Limited Site and Resource Availability
5. Solar PV – Higher Cost
6. Nuclear – Waste disposal

2. The Solution:

Solar PV (Photovoltaic) systems effectively deliver three to five hours of peak power per day at roughly 10 Watts per square foot. Not one square inch of new land would be required to site PV. Theoretically, there are adequate residential, commercial, Government rooftops, and parking structures in California to power a substantial percentage of our State’s electrical needs from solar.

In Southern California, solar produces a net energy gain in approximately three years. This means that within three years, PV systems begin producing more energy than the energy spent in producing the system and its raw materials. Best of all, the energy produced cost zero emissions.
At today’s prices, a typical solar system costs approximately $8.00/watt, installed and has an operating life in excess of 25 years. For all intents and purposes, maintenance and operating costs are minimal. Now there are systems available for rent. Companies such as Citizenre at www.jointhesolution.com/rethink-solar allow you to create solar power of a unit that is installed, maintained and monitored by them. You merely pay the monthly rental fee for you clean electricity which is the same price as you pay the electric company for you electricity. Also they allow you to lock in a rate now for up to 25 years so you are paying the same price throughout the entire contract.
3. The Results:

Solar energy increases the diversity of power and adds stability to a fossil fuel favored energy structure, while reducing greenhouse gas emissions.
4. The Benefits:
– Solar can be quickly deployed at the point of use, reducing the need for additional transmission and distribution infrastructure, and cost thereof.

– Solar operates most efficiently at mid day, when grid demand is at its peak. By decreasing the strain during peak hours, the longevity of existing power plants and infrastructure is extended, lowering further the cost of energy production.

– By deploying solar over time the cumulative effect of the installed base is impressive. Given its 25-year life, within 10 to 20 years, a respectable portion of California’s energy could be supplied by solar.

– Once installed, the cost is fixed. In comparison to traditional sources of energy, the fuel cost is nonexistent, and operational costs are limited. A solar system’s cost is amortized over its life, there are no rate hikes due to fuel or operating cost increases.
5. An Investment in the Future:

There are some negatives. Presently, solar costs more than traditional energy generation. Its efficient use is limited to daylight hours unless storage is employed. Admittedly, the solar industry today is not large enough to address all of our needs. The solar industry does not have the financial influence to compete with existing utilities, which typically oppose PV, within political circles. (Industry revenues globally represent only 3.0B/year). Globally, the industry has experienced an annual growth rate in excess of 18% in over a decade. This rate of growth is equivalent to that of semiconductor, telecommunications and computer industries.

Clearly, there is no easy solution to California’s energy problem. No doubt, a variety of technologies and tools are needed to ensure California’s energy independence and security.
The Solar Industry Needs Your Support
For those interested in promoting a clean, safe and environmentally friendly source of energy, I urge you to write your representatives in the State and Federal Government. Make it clear you vote for representatives who support current legislation aimed at advancing the deployment of solar energy, such as the net metering law which allows the solar producer to feed surplus power onto the grid, causing the meter to spin backward, lowering the electric bill. Tax credits and deployment subsidies provide the revenues necessary to support research and development of more efficient solar systems.

Remember, in the 1970′s the State of California enacted emission standards that surpassed the rest of the nation. The argument against these standards was the cost of such improvements. Almost 30 years later, the impact is in the air and reflected in the increased fuel economy of the vehicles we drive.

Solar energy is part of the solution and is a key to America’s long-term energy supply. After all, fossil fuels have a long history of issues with respect to stability of supply and cost.
The Outlook of Solar Power is Bright!
1. Solar will sustain its torrid growth, as costs continue to fall. The solar market has grown at ~40% per annum in recent years, and there are many reasons to think that it will sustain, if not exceed, that clip in 2008. Solar panel prices have followed a predictable experience curve since the 1970’s, with prices dropping by 20% with each doubling of manufacturing capacity. As the silicon-dominated industry moves to thinner and higher-efficiency wafers, increases manufacturing scale, improves wafer and cell processing technologies, sees polysilicon prices return to rational levels, and migrates production to lower-cost countries –- costs will continue to drive towards parity with grid rates, and solar will become increasingly more attractive. Companies have developed creative PPA (power-purchase agreement) financing models to reduce or eliminate upfront installation costs, which will make solar more accessible for a wider range of corporate and residential customers. The election year should also see more state subsidy support for solar and a renewal of the federal tax credit, which will further bolster growth.
2. Emerging startups that benefit from the polysilicon supply shortage will face increased pressure, as the poly-Si crunch begins to ease. Solar veterans can debate the timing endlessly, but many expect additional poly-Si supply to come online by late 2008. Startups that tout silicon-independent solar solutions, like concentrators and thin film (CIGS, a-Si, CdTe, etc.), will face pressure to come to market more quickly, as their cost/supply advantages erode with greater availability of poly-Si and a retreat from spot-pricing. E.g., none of the CIGS thin-film startups, which have collectively received hundreds of millions in investment in recent years, managed to reach mass commercialization this past year as many had projected. They will continue to be under pressure to reach market before the window of opportunity closes.
3. Entrepreneurs will increasingly look beyond cell and module production. As the technology-heavy areas of cell and module production get crowded, more and more entrepreneurs look to startup opportunities in the downstream balance-of-systems part of the value chain. This area has seen less attention to date, yet makes up ~50% of the total installed cost. Novel packaging techniques, distributed inverter / MPP tracking / power management technologies, systems monitoring solutions, streamlining of the installation process, and creative solar financing models — entrepreneurs increasingly recognize the ripe opportunity in this part of the solar business, and 2008 should see heightened startup activity in this area.
4. China and India will begin to emerge as strong domestic markets for solar. With a 500 MW coal-fired plant going up in China every week, the growth of greenhouse gas emissions has reached dizzying levels. China already “boasts” 16 of the 20 most polluted cities in the world, with hundreds of thousands a year dying prematurely from such pollution. Many experts expect that the government will spend tens of billions of dollars in the next 5-10 years –- a significant portion going to solar -– to reach the mandate of 15% from renewables by 2020. In India, where the energy shortfall has reached 15% and domestic coal reserves will run out in ~50 years, the government is actively pursuing incentive policies and feed-in tariffs to help drive the use of solar and other renewables. 2008 should see further policy refinement in both countries, which will spur increased domestic adoption of solar.

Few people doubt solar energy’s potential, but many wonder when it will be reached. “In the long term, solar may well play an important role,” Karg says. “I personally expect a contribution of 10 to 20% of the global electricity production, mainly in the form of grid-connected systems.” However, he does not foresee that happening within the next 20 years.
Nevada Solar One
The sun sits high over the Nevada desert in the Eldorado Valley, gleaming off the upside down rows of mirrored parabolic trough collectors at the Nevada Solar One power plant.
At 64 megawatts (MW) of generation capacity, Nevada Solar One is the largest CSP plant to be built in 15 years. While the plant won’t come online until April, its construction marks the revival of an industry that has seen almost no market growth in over a decade.

The plant was developed by Acciona Energy and Solargenix Energy — two companies that have worked hard behind the scenes to get the CSP industry up and running again.

The plant uses parabolic trough collectors to generate electricity. The mirrored troughs face the sky and direct sunlight to a large metal and glass receiver in the middle of the trough that holds circulating oil. The oil travels to heat exchangers, which heat water and create steam to run a turbine. Parabolic troughs are one of three commercialized CSP technologies.

Further down the row of parabolic troughs, Plant Manager Bob Cable admires the impressive devices before him.

“I’ve been working with this technology for the last decade,” Cable says. “I’ve seen some impressive gains in technological advancement, and now we’re seeing more broad acceptance of the technology as the market becomes more attractive.”

Indeed, after roughly a decade of little growth for the industry, CSP is coming back strong. And it’s not just parabolic trough collectors that are experiencing a boom. Power towers, which use heliostats to focus solar energy on a central receiver to produce steam, and dish systems, which use reflectors to power a generator at the dish’s focus point, are making great strides in technological capabilities, lower costs and market acceptance.

But according to Thomas Rueckert, Program Manager for CSP Management at the U.S. Department of Energy, parabolic troughs are the most advanced.

“Because of the track record [the parabolic trough industry] had in southern California with the 354 megawatts (MW) operating — and actually improving in performance — I think you’re seeing the financial institutions more willing to embrace trough technology because it’s proven and the risks are less,” said Rueckert.

Rueckert was referring to the 354 MW of parabolic trough collectors installed in California’s Mojave Desert between 1984 and 1990. Those plants are still operating today, currently producing energy at around $0.12-$0.14/ per kilowatt-hour (kWh) and proving the technology can provide clean, reliable energy to the grid.

The Nevada Solar One plant will produce electricity at around $0.15-$0.17/kWh. While those costs are double what area residents pay for electricity, Nevada Solar One will sell energy to two utilities through a power purchase agreement (PPA). The PPA will ensure a fixed cost for the electricity over a long period, making the solar power economical down the line.

Now that global investment in CSP is increasing, technology costs are decreasing and renewable portfolio standards (RPS) in the U.S. are requiring more solar generation, project costs for all CSP technologies should come down significantly in the coming years, said DOE’s Rueckert.

“All of those things have really opened the door,” he said. “And it’s interesting that all three technologies are pushing forward, which was kind of unexpected.”

Back at Nevada Solar One, Acciona Solar’s Cohen stands before the group of reporters and members of the solar industry who have come to witness the rebirth of CSP.

“The potential is huge. It was difficult to get the attention of the financial institutions in the U.S., but right now we have their attention. We get a lot of people asking us, ‘how can we develop this technology?’”

Dr. Alex Marker, Research Fellow for Schott North America, Inc., stands to the side of Cohen, nodding his head. Schott is certainly feeling the positive impact of increased CSP development. To meet the demand for its glass receivers, the company brought a new receiver manufacturing facility online in Germany last summer and is developing another facility in Spain that will come online in early 2008.

“I think [the market] is going to grow drastically,” says Marker, looking over at the receivers in the troughs. “We’re happy to be a part of this new development.”

Now that financial institutions are noticing CSP, companies like Acciona and Solargenix will be able to tap into the vast resource potential in the Southwestern U.S.

According to figures from DOE’s Solar Lab, 20,000 MW of CSP capacity could come online in the U.S. by 2020 with the proper investment and technological capabilities. Rueckert seemed optimistic that a large amount of those resources will be tapped.

“When this plant comes online next month, it’s going to be a great success,” he said. “The market is exploding and things are really taking off.”

Indeed, a solar panel for your home, whether brand new, second hand or rented, is definitely a wise choice as it helps you in minimizing your electric bills, helps the worlds growing energy needs and is especially an environmentally healthy and helpful choice.

If you’re interested in getting more info on a free solar panel installation check out www.jointhesolution.com/rethink-solar

Also if your interested in joining the solution and becoming a Citizenre sales associate check out www.powur.net/rethink-solar

Learn how to create electricity and save your bills!! Read on how you can make your very own solar panels at your own home! small solar panels small solar panels


Using Biofuels As A Green Energy Source

Monday, June 15th, 2009

Biofuels are also a green energy source. It has been around for a very long time and lately, people are beginning to take notice.

Liquid biofuel which is the one used in cars is a natural and renewable domestic fuel that can only be used for diesel engines. This can be made from vegetable oils mostly soy and corn. The nice thing about it is that it contains no petroleum, is nontoxic and biodegradable.

By fueling up with biofuel, you cut the pollutants in the air because it does not emit anything. Right now, it is the only fuel approved by the Environmental Protection Agency (EPA), passed every Heath-Effects Test of the Clean Air Act and meets the requirements of the California Air Resources Board (CARB).

One example of this is biodiesel which is made from alcohol like methanol and a chemical process that separates glycerine and methyl esters (biodiesel) from fats or vegetable oils. Aside from methanol, some countries have also experimented with corn and sugarcane to create their own form of biofuel.

Glycerine is a common product and this is used in making toothpaste and soap. Since it is quite new, the process of converting it is quite expensive and right now, this is still much more expensive per gallon compared to petroleum.

But if you look at what you pay for it, the returns are huge because you get to do your share to preserve a cleaner environment, an improvement in air quality and a reduction of cancer-causing agents.

A cheaper and primitive way to make bio-diesel is by collecting cooking oil and then processing it. This may not good your car’s engine so be careful if you choose to use it.

If you are skeptic about biodiesels, studies have shown that its performance on the road is just as good as petroleum in terms of power to efficiency, hauling and climbing. You can use this in its pure form or blend with petroleum fuel. The most common mix in the market is 20/80 and is referred to as “B20.” This means that 20% is biodiesel and the remainder is 80%. Another version is the E85 which is fuel composed of 85% ethanol and 15% gasoline.

The best part about using biodiesel is that you only have to make a few changes in your engine to be able to use it. Apart from making the car run, it also helps clean the engine. If you are afraid that this will void the warranty of your vehicle should there be a problem, don’t worry because it doesn’t. In the US, B20 is the most common one available but there are only a few gas stations that carry it.

When car’s first rolled out in the beginning of the 20th century, Henry Ford planned to make these vehicles especially the Model T’s run using ethanol. Tests have even shown that these may also run using peanut oil.

This never materialized because huge oil deposits were discovered and diesel was low-priced. It was only when our demand for oil increased in the 1970’s, 1980’s, 1990’s and in the early part of this year that people began to realize that to reduce our demand for foreign oil that we should try using biodiesels and other forms of alternative energy.

Is it too late? Not yet because there is still time to use biofuels and others as green energy sources.

Jason Livingston operates iBuyLessGas.com and is spreading the word about the Ethos FR Gasoline Saver. Jason is dedicated to helping the world to improve gas mileage.